Please make sure that the part is compatible with your vehicle before purchasing.
Product Information
Product Name: Full LED Tail Light Left & Right Set Ver.2 with Switchable Sequential Turn Signals
Product Features
Upgrade your vehicle's rear lighting with this Full LED Tail Light Set Ver.2, designed specifically for the Suzuki Jimny, Jimny Sierra, and Jimny Nomade.
Featuring full LED illumination, switchable sequential turn signals, crystal-style light bars, and a direct plug-and-play design.
Crystal Fiber Position Lights
The position lights feature an indirect-illumination clear fiber design.
Crystal-cut detailing on the rear surface of the light bars helps diffuse the LED light for a distinctive and uniform appearance.
Crystal-Cut Turn Signal Lenses
The turn signal section features crystal-cut detailing on the surface of the light bars.
This design helps conceal the individual LED elements when the lights are off while improving visibility when illuminated.
Switchable Sequential Turn Signals
Features sequential turn signals that illuminate progressively from the inside toward the outside.
The turn signal mode can be changed between:
- Sequential Mode
- Standard Flash Mode
The lighting mode can be switched by connecting or disconnecting the connector located on the back of the tail light assembly.
Indirect-Illumination Brake & Reverse Lights
The brake and reverse light sections use an indirect illumination system that reflects the LED light through internal reflectors.
This helps diffuse the LED output and improve visibility.
Built-In Hyper Flash Prevention
Load resistors are built into the tail light assemblies to help prevent hyper flashing that can occur when replacing factory halogen turn signals with LEDs.
Plug-and-Play Installation
Designed as a direct replacement for the factory tail lights.
Installation is plug-and-play and bolt-on, with no wiring modification or vehicle body modification required.
Included Items
- LED Tail Light – Left × 1pc
- LED Tail Light – Right × 1pc
- Installation Manual
Manual is shared with the Ver.1 model.
Compatible Vehicles
Suzuki
- Jimny (JB64W)
- Jimny Sierra (JB74W)
- Jimny Nomade (JC74W)*
*Rear fog light function cannot be used on the Jimny Nomade (JC74W) with this product.
Variations (4type)
- Red / Clear Lens (Chrome Inner)
- Red / Smoked Lens (Chrome Inner)
- Smoked Lens (Chrome Inner)
- Clear Lens (Chrome Inner)
The reflector section features a light smoke lens.
Specifications
| Item |
Specification |
| Light Source |
Full LED |
| Position Light |
Crystal Fiber / Indirect Illumination |
| Turn Signal |
Sequential / Standard Flash |
| Brake Light |
LED / Indirect Illumination |
| Reverse Light |
LED / Indirect Illumination |
| Hyper Flash Prevention |
Built-In Resistors |
| Inner Housing |
Chrome |
| Installation |
Plug-and-Play / Bolt-On |
| Quantity |
2 Pieces (Left & Right) |
Installation
Remove the factory tail light assemblies and replace them with the new LED tail lights.
The product uses factory-style connectors and mounting points.
No wiring modification or vehicle body modification is required.
The turn signal can be switched between sequential and standard flashing modes using the connector on the back of the product.
Note:
Please check the part compatibility before purchasing.
Jimny Nomade (JC74W): The rear fog light function cannot be used with this product.
For lens variations other than the red-type lenses, the reflector section is not red. Depending on local vehicle regulations, separate red reflectors may need to be installed.
Please check the applicable vehicle lighting and road regulations in your country or region before installation and use.
We are not responsible for any labor costs for installation, removal, or repair.
Shipping & Returns
This product may be subject to customs duties or import taxes. Any such fees are the responsibility of the customer.
Please note that it may take up to one week to ship your order (handling time).
Due to international shipping, we are unable to accept returns or refunds for reasons attributable to the customer.
